How much does pallet rack cost?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and itemized quote for new pallet rack.

How much weight can pallet rack hold?

There is no single capacity for pallet rack: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities for the installed configuration on load plaques.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs and direct access to each pallet. Pushback stores pallets 2–6 deep with LIFO rotation by SKU; pallet flow suits FIFO or dated stock; drive-in suits bulk quantities of few SKUs; cantilever supports long loads; carton flow serves case picking.

Can I add on to my existing pallet rack?

Usually, if the connections match and the resulting configuration has the required capacity. "Teardrop" is not universal across manufacturers. Send photos of the upright face, beam connector, and any label so we can match new components to your existing rack.

Do you install pallet rack?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The rack is anchored to the floor, and the layout and load capacities are reviewed at handover.

Mesquite, Nevada

Cantilever Rack in Mesquite, NV

Contractor pipe and trim need supported storage when replenishment arrives in large bundles. Arm count and spacing should suit the smallest as well as the longest bundle so material stays supported as stock is consumed. Cantilever warehouse racking supports long material on arms without a front beam across the loading face. We size the arms, columns, and support spacing to the actual bundle lengths and weights, rather than trying to force long stock into pallet-sized bays. Request a free design consultation and an itemized plan before choosing a layout.

A Mesquite business may carry extra reserve between deliveries while also serving daily local orders. The storage system needs to handle that uneven inventory cycle without filling the travel aisles or making every urgent pick depend on moving bulk stock first.

(702) 745-0321

Why Mesquite Warehouses Work With Us

I-15, Pioneer Boulevard, and Mesquite Boulevard define the local delivery context. A Mesquite project should account for receiving intervals and the amount of stock held between replenishments, rather than assuming a daily supply pattern. Hospitality, regional trade supply, and contractor inventory can each have different peak quantities. We work from your delivery calendar and actual product list so the layout provides both reserve storage and a practical path for the orders leaving each day.

The important tradeoff is supported material length versus the room required to handle it. We review the longest and shortest loads, bundle stiffness, and weight carried by each arm. Single-sided and double-sided layouts should be compared with the same handling route. Arm adjustment is useful only within the rated column and base configuration, not as permission to add unrestricted weight.

Las Vegas Warehouse Racking connects your Mesquite project with Warehouse Equipment & Supplies Co. The discussion covers design, quoting, installation planning, and later changes to the approved system. Call (702) 745-0321 with the building drawing and product details; we will identify what needs checking before material is ordered or existing rack is changed.

Free Design Consultation

CAD layout with position counts

Installation planned around your operation

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Local planning context includes I-15, Pioneer Boulevard, Mesquite Boulevard.

Regional supply

Hospitality replenishment

Contractor inventory

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns are anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out.

The quote itemizes columns, bases, arms, and bracing, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Experienced installation crews we schedule and manage assemble the rack anchored to the floor, align the columns, brace the run, and set arm elevations to the drawing.

The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy.

The layout is checked against the building dimensions and the operating envelope of your handling equipment. Receiving space, loaded pallet dimensions, beam spacing, and access to each storage zone are resolved before material is ordered. Component availability and installation timing are confirmed in the quote rather than promised from a standard schedule. Experienced installation crews we schedule and manage work from the agreed drawing, with the rack anchored to the floor. At handover, your team receives the layout and capacity information for the installed configuration, with travel paths and loading arrangements reviewed before the rows are put into service.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (702) 745-0321

Recent Installations

Racking projects completed for warehouses across Las Vegas Valley and surrounding Nevada communities.

View More Projects

Get a Cantilever Rack Quote for Your Mesquite Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (702) 745-0321.

Las Vegas Warehouse Racking

3111 S. Valley View Blvd.

Ste. B216 #314

Las Vegas, NV 89102

(702) 745-0321

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Las Vegas Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Cantilever Rack Questions We Hear Most

Related Rack Systems and Services in Mesquite

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Drive-In Rack

Deep storage lanes for bulk inventory, with the forklift entering the rack to place each pallet.

View details

Warehouse Relocation

Rack teardown, labeling, transport coordination, and reinstallation planned around the new building.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Las Vegas Valley and surrounding Nevada communities, so one team can handle multiple buildings for the same company.

Cantilever Rack in Las Vegas Cantilever Rack in North Las Vegas Cantilever Rack in Henderson Cantilever Rack in Paradise Cantilever Rack in Summerlin Cantilever Rack in Spring Valley

View All Service Areas

Cantilever Rack across our service area